The light controller is a smart light controller developed based on ZHAGA BOOK18 interface standard. It adopts a combination sensor of light sensing and microwave sensing, DALI2.0 dimming signal, supports dual-mode configuration of dip switch and infrared remote control, and is equipped with Casambi Bluetooth mesh communication network. It can be controlled and configured by APP near field, and can also be configured remotely with Bluetooth gateway. The light controller is suitable for road, lawn, yard, park, parking lot, factory, warehouse and other lighting scenes. The working logic of the product is that when the illumination level is met to turn on, the lamp operates at a slightly bright. If a moving object is detected at this time, the lamp becomes fully bright, and after the full bright duration is completed, it returns to a slightly bright. When stand-by peroid is over or the illumination level is met to turn off, the lamp will be turned off.
Power supply
Voltage：12~24VDC
Current：12V/70mA；24V/35mA
Power consumption
＜0.7W
Dimming
DALI2.0
Sensors
Light+Microwave
Spectral acquisition range
Range：0.01~64000Lux
Wavelength：350~1100nm，Peak 550nm
Microwave frequency
5.8GHz
Maximum hanging height
15m
Sensing radius
4-8m
Sensitivity
Factory default maximum sensitivity (100%), adjustable by dialing or remote control
Hold time
Default 30S，adjust through APP/IR/Dip switch
Stand-by dim level
Default 0%，adjust through APP/IR/Dip switch
Stand-by period
Default ∞，adjust through APP/IR
Turn on Illuminance
Factory default daytime light on (FF) is also triggered, and the APP/infrared remote control/dial switch is adjustable
