It uses a combination of light sensing and microwave sensing sensors, can output 0-10V dimming signals, and supports infrared remote control for parameter configuration. The light controller product is a smart latch type light controller developed based on the Zhaga Book-18interface standard. It uses a combination of light sensing and microwave sensing sensors, can output 0-10V dimming signals, and supports infrared remote control for parameter configuration. This light controller is suitable for lighting scenarios such as roads, lawns, courtyards, parks, parking lots, factories, warehouses, etc. The working logic of the product is that when the illumination level is met, the lamp operates at a slightly bright brightness. If a moving object is detected at this time, the lamp becomes fully bright, and after the full bright duration ends, it returns to a slightly bright brightness. When the slightly bright duration ends or the illumination level is met, the lamp is turned off. Zhaga boook-18 stree lighting Controller
Power supply
Voltage: 12-24VDC
Current: 12V/35mA; 24V/25mA
power dissipation
＜ 0.385W (12V); ＜ 0.55W (24V)
Dimming interface
0-10V
Sensor type
Light sensitivity+microwave
Spectral collection range
Range: 0.01~64000Lux W
avelength: 350~1100nm
Microwave frequency
5.8GHz
Maximum support for microwave hanging height
15 meters
Induction radius
≥ 10 meters
Power on initialization
By default, it remains on for 5s (gradient) when powered on, and then runs normally according to the parameter settings and environmental conditions
Inductive sensitivity
Factory default of 80%, infrared remote control adjustable
Full light duration
Factory default 30S, infrared remote control adjustable
Slightly bright brightness
Factory default 0%, infrared remote control adjustable
Slightly bright duration
Factory default infinite, infrared remote control adjustable
Illumination threshold for turning on lights
Factory default 50lux, infrared remote control adjustable
Controlled light reflection compensation value
Factory default ∆ 50lux, infrared remote control adjustable
Illumination threshold when turning off lights
Illumination on+controlled light reflection compensation value
Maximum power ratio
Factory default 100%, infrared remote control adjustable
